Iltis-Forum > Akute technische Probleme/Fehler und deren Lösungen

Woo, yeah!

<< < (4/6) > >>

www.iltisteile.com:
the rearmost tubes of the roll bar are rectangular rather then round, to grant the neccessary 4cm more clearance for the two stretchers side by side

Baxter:
I wonder if this Iltis is a miss match of parts then?
Why would it need the roll over bar from a medic car if it still has it's jerry can and spare wheel on the rear?
It left as a standard Iltis, but it hass the roll over bar and red cross signs, but a standard hood?
It also has rear seats.
The VIN matches the one on the plate under the body so the body and chassis are correct.
hmm.

www.iltisteile.com:
you have holes in the rear right fender?
this was a former ambulance!
there was the spare wheel fixed.

most of the medics were retransformed by bundeswehr, as there was no real need for them in the 90s.

but the rollbars always stayed
for the hood, there was a doorsack with cross printed on it

Lillifee:
Hello Simon,

you wrote that you've found red crosses under the paint:

--- Zitat von: Baxter ---The bonnet has a big red cross under the paint, and the rear panel, and rear 1/4 panels also have red crosses painted over.
--- Ende Zitat ---


You've got an ambulance roll over bar, two holes at the side, ... -> Your Iltis was certainly first produced as a a medic vehicle (You've also got no trailer hitch - do you?).
And later it was used in other content -> Therfore they put rear seats in, ...

I think this is (one part of) "the story" of your car.

FYI: On this picture you can see an "usual" roll over bar of an Iltis (= "round" back brackets): Example

Lillifee:
[quote Baxter]I live in Yorkshire, our accent is quite "broad", I should imagine it's pretty much the same wherever you go? I'm sure you can tell where someone is from from the way they speak?[/quote]
Yes - it makes (among other things) our life colourful. :)

Navigation

[0] Themen-Index

[#] Nächste Seite

[*] Vorherige Sete