VW-ILTIS Forum • Das Original 2.0

Iltis-Forum => Akute technische Probleme/Fehler und deren Lösungen => Thema gestartet von: Baxter am 25. Juni 2014, 23:12

Titel: Wischwasch intervallschaltung kabelbaum
Beitrag von: Baxter am 25. Juni 2014, 23:12
Moin.
Entschuldigen, Ich bin Englaender, Meine Deutsch ist Schlecht!

I want to carry out the intermittent wiper modification.
I have read the WiKi, however something is lost in Google Translate and the instructions do not really make sense to me.

I have the relay.
I have the connectors as most are used on T3.
I have spare wire.

Can anyone point me towards any more information?
Titel: Re: Wischwasch intervallschaltung kabelbaum
Beitrag von: Housil am 26. Juni 2014, 00:15
Zitat von: Baxter


I have read the WiKi, however something is lost in Google Translate and the instructions do not really make sense to me.


If do you link or quote, I can give you a hand with translation.
Titel: Re: Wischwasch intervallschaltung kabelbaum
Beitrag von: Baxter am 14. Juli 2014, 23:37
http://wiki.vw-183.de/index.php/Scheibenwischermotor

Sorry for the delay. *ahem* delay, sorry, I'll get my coat...
Titel: Re: Wischwasch intervallschaltung kabelbaum
Beitrag von: Housil am 15. Juli 2014, 00:49
It´s about this, right?
(http://up.picr.de/18918753zr.jpg)

First of all, you need a "new" lever. The Iltis one has only 3 steps. Off, first and second speed. You need one from e.g. Golf1 or Jetta. They had that intermittent wiping contact extra.
(That´s what the first chapter said).

Next is, you have to built in the "Intervall-relay" into the existing wiring.
They decided to use the connecting points of the "Schalttafelkabelbaums" (switch board wiring), of the "Maschinenkabelbaum" (engine wiring) and that wiper motor.
You only need that wiring to the "Maschinekabelbaum" if do you want to use that combined wash/sprinkle relay. You also have to add another contact into the plug connector of the wiper lever in that case so you can keep the original wiring.

Next is a list of parts you need.

Now make that wiring as shown:
(http://up.picr.de/18918976ik.jpg)
An connect it to the existing wiring and plugs. Only wiring No 53 need to be cut apart and if need be looped through the relay.



I didn´t even understand that German so don´t be confused about the translation. :D
Titel: Re: Wischwasch intervallschaltung kabelbaum
Beitrag von: Baxter am 15. Juli 2014, 23:09
Danke!
:-)
Ich habe schalter.
Ich habe kontrolrelais.

Cut 53, that's all I needed.
Titel: Re: Wischwasch intervallschaltung kabelbaum
Beitrag von: Housil am 15. Juli 2014, 23:29
(tu)